BEA1000 Series Industrial Dual-Band Wi-Fi 5 High-Performance IIC Explosion-Proof AP (IP66)

BEA1000 Series Industrial Dual-Band Wi-Fi 5 High-Performance IIC Explosion-Proof AP (IP66)

Max data rate 867 Mbps (5G) & 300 Mbps (2.4G)

2x2 MIMO

Supports 802.3at (PoE+)

IP66 rating, operating temperature -40℃~70℃, explosion-proof class IIC

Download

Product Overview

BEA1000-WA50021662 series outdoor industrial wireless AP provides AP, bridge and routing modes with AC centralized management. 48V PoE+ powered, with mounting bracket for convenient pole installation.

IP66 dust/water resistance with wide-temperature hardware for outdoor rain and extreme temperatures. Dual Ethernet ports for high-speed links and peripheral expansion, reducing on-site trenching for plant coverage, long-range bridging and outdoor security backhaul.

Certifications

FAQ

  • The cable is connected, but the port will not come UP / the link is down. What should I check?

    +

    1) Confirm an industrial-grade cable and proper RJ45 crimping. 2) Check speed/duplex settings; set both ends to auto-negotiation. 3) Check whether the port is administratively shut down, in the wrong VLAN, or restricted by port security.
  • What are the PoE power specifications?

    +

    Standard PoE and PoE+ are supported, with max per-port power of 15.4 W and 30 W respectively. Total system power budget must be calculated during selection to avoid insufficient supply when too many PDs are connected.
  • Which ring protocols are supported, and what is the self-healing time?

    +

    Mainstream industrial ring protocols such as ERPS (G.8032), RSTP/STP, MRP, and PRP are supported. ERPS typical self-healing is ≤50 ms; traditional RSTP is second-level. It is recommended to use one ring protocol consistently across the network.
  • How should I choose between Layer-2 and Layer-3 industrial switches?

    +

    Layer-2 switches: basic features such as VLAN, ring networks, and port mirroring; suited to access layers and same-subnet networking with strong cost performance. Layer-3 switches: add static routing, OSPF, DHCP relay, multicast, and other routing features—choose these when cross-subnet communication or core/aggregation networks are required.
  • Can non-OEM SFP optical modules work normally?

    +

    The device is compatible with generic IEEE 802.3 SFP modules. Non-OEM modules can usually be recognized, but some brands may have compatibility issues. OEM modules are recommended.
  • How do I restore factory settings if I forget the device login password?

    +

    1) Hardware reset: press and hold the RESET button for 5–10 seconds; the device reboots to factory defaults. 2) Software reset: use the vendor NMS to restore factory settings remotely. All custom configurations will be cleared after restore.
  • What are the power supply requirements for industrial switches?

    +

    DC models support 18–60 VDC or 9.6–60 VDC; AC models support 100–240 VAC, with dual redundant power inputs. Phoenix terminal wiring; reverse-polarity protection is built in so normal reverse connection will not damage the device.
  • What are the operating temperature range and protection rating of industrial switches?

    +

    All-metal aluminum alloy housing. Operating temperature is -40°C to +75°C; premium wide-temperature models reach -40°C to +85°C. Typical enclosure rating is IP40.

Features

802.11a/b/g/n/ac

Max. data rate 867 Mbps (5G) & 300 Mbps (2.4G)

2x2 MIMO technology

Support 802.3at protocol (POE+)

Protection rating IP66, operating temperature -40℃~70℃, explosion-proof class IIC

Specifications

  • Software performance-

    processorIPQ4028
    WiFi standardsIEEE 802.11a/b/g/n/ac dual-band technology
    Wireless securityWPA2-PSK, hidden SSID, IP/MAC filtering
    MIMO2.4GHz 2x2 300Mbps
    5.8GHz 2x2 867Mbps
    Ethernet interface2*10/100/1000Mbps
    Memory/Flash256MB DDR3L,32MB Flash
    network modeAP/Bridge/Route
    operating modeAP / Station / WDS AP / WDS Station
    Max. transmit power2.4G:25dBm、5G:24dBm
    Configuration managementSupports web configuration, AC remote management, and SNMP management
    otherLoad balancing, 802.11r roaming, client rate limiting, max user configuration, VLAN support, dual firmware backup, QoS, intelligent thermal control, dynamic channel selection, wireless network probe, Watchdog, STP (Spanning Tree Protocol), scheduled reboot
  • RF performance+

    Modulation methodData rate/modetransmit powerReceive sensitivity
    11b/g/n1Mbps~54Mbps19~22dbm-70~-93dBm
    11b/g/nHT20/40 (combination)21~25dbm-68~-88dBm
    11a/n6Mbps~54Mbps18~21dbm-65~-70dBm
    11a/nHT20/40 (combination)20~24dbm-65~-88dBm
    11acHT20/40/80 (combination)18~24dbm-57~-88dBm
  • Power parameters+

    Power supply method48V POE+
    overload current protection600A
    reverse polarity protectionsupport
    Maximum power consumption (W)12
    Average power consumption (W)9
  • Physical Characteristics +

    Product dimensions (W× H × D) (mm)250x250x200mm
    Weight (kg)13
    MountingWall installation
    shellMetal
    Protection ratingIP66
    explosion-proof class Exd IIC T6
    antennaOptional external antenna
    interface2×N type interface
    MTBF200000 hours
  • Environmental Characteristics +

    Storage Temperature-40℃~85℃
    Operating temperature-40℃~70℃
    humidity5%~95% RH (non-condensing)
    surgePOE/GE: common mode 4KV, differential mode 2KV
    static electricityContact 4KV, air 6KV
    Wind resistance150km/h
  • Mechanical Characteristics +

    vibrationComplies with IEC 60068-2-6
    impactComplies with IEC 60068-2-27
    circuit board/
  • Electromagnetic Characteristics +

    EMI radiationComply with GB/T 9254 / CISPR 32, Class A
    EMCComplies with IEC 61000-4-2,3,4,5,6
  • Industry certification testing+

    Product SafetyComply with GB 4943.1
    transportation industrynot applicable
    EMCConforms to EN 301 489
    unitmm

Dimensions

 

Dimensions

 

Dimensions

AP

Host antenna

PoE power supply module (PoE adapter)

Host mounting bracket

Antenna mounting bracket

RF feeder

Please connect the PoE port of the power supply module to the PoE interface of the AP host.

The network port (LAN) of the PoE power supply module can be connected to other network devices.

Accessories

Copyright 2026 MRD Co LTD . All Rights Reserved Shanghai ICP No.12035199

Top

Get a Quote

Leave your details and we will provide a quotation for this product.

Download

Leave your details. After successful submission, you can download the materials.