Home / Product Center / Industrial Ethernet / Ethernet Switch / M12-Connector Switch / TCC4100 Outdoor IP54/IP67 Switch...

TCC4100 Outdoor IP54/IP67 Switch
TCC4100 Outdoor IP54/IP67 Switch

TCC4100 Outdoor IP54/IP67 Switch

Backplane bandwidth up to 52 Gbps

Supports MRD-Ring® Ethernet ring; node recovery <5 ms, ring recovery <50 ms (typical)

Supports IEC 62439 MRD ring media redundancy protocol

Any two ports can form a self-healing ring; multiple independent rings supported

Get a Quote Claim Coupon Download
Download

Product Overview

The TCC4100 outdoor IP54/IP67 industrial Ethernet switch supports flexible Gigabit and Fast Ethernet ports as fiber or copper. Backplane bandwidth is up to 52 Gbps. Any two ports can form a self-healing ring. Multiple independent rings are supported with dual fiber, single fiber, twisted pair, or combinations. Patented MRD-Ring® hardware recovery ensures node recovery <5 ms and ring recovery <50 ms (typical).

TCC4100 outdoor IP54/IP67 uses FPGA and CPLD dynamic reconfiguration and reprogramming for high stability and reliability, with local and remote monitoring of key operating parameters. Extended industrial design and process suit harsh and outdoor environments.

Certifications

Contact

FAQ

  • The cable is connected, but the port will not come UP / the link is down. What should I check?

    +

    1) Confirm an industrial-grade cable and proper RJ45 crimping. 2) Check speed/duplex settings; set both ends to auto-negotiation. 3) Check whether the port is administratively shut down, in the wrong VLAN, or restricted by port security.

  • What are the PoE power specifications?

    +

    Standard PoE and PoE+ are supported, with max per-port power of 15.4 W and 30 W respectively. Total system power budget must be calculated during selection to avoid insufficient supply when too many PDs are connected.

  • Which ring protocols are supported, and what is the self-healing time?

    +

    Mainstream industrial ring protocols such as ERPS (G.8032), RSTP/STP, MRP, and PRP are supported. ERPS typical self-healing is ≤50 ms; traditional RSTP is second-level. It is recommended to use one ring protocol consistently across the network.

  • How should I choose between Layer-2 and Layer-3 industrial switches?

    +

    Layer-2 switches: basic features such as VLAN, ring networks, and port mirroring; suited to access layers and same-subnet networking with strong cost performance. Layer-3 switches: add static routing, OSPF, DHCP relay, multicast, and other routing features—choose these when cross-subnet communication or core/aggregation networks are required.

  • Can non-OEM SFP optical modules work normally?

    +

    The device is compatible with generic IEEE 802.3 SFP modules. Non-OEM modules can usually be recognized, but some brands may have compatibility issues. OEM modules are recommended.

  • How do I restore factory settings if I forget the device login password?

    +

    1) Hardware reset: press and hold the RESET button for 5–10 seconds; the device reboots to factory defaults. 2) Software reset: use the vendor NMS to restore factory settings remotely. All custom configurations will be cleared after restore.

  • What are the power supply requirements for industrial switches?

    +

    DC models support 18–60 VDC or 9.6–60 VDC; AC models support 100–240 VAC, with dual redundant power inputs. Phoenix terminal wiring; reverse-polarity protection is built in so normal reverse connection will not damage the device.

  • What are the operating temperature range and protection rating of industrial switches?

    +

    All-metal aluminum alloy housing. Operating temperature is -40°C to +75°C; premium wide-temperature models reach -40°C to +85°C. Typical enclosure rating is IP40.

Features

High-performance industrial linear Ethernet switch

Backplane bandwidth up to 52 Gbps

Dust/water resistant for outdoor/field applications

Supports tree, chain hand-in-hand, ring and other topologies

Supports Ethernet ring based on MRD-Ring®; node recovery <5 ms, ring recovery <50 ms (typical)

Supports MRD ring media redundancy protocol based on IEC62439

Any two ports can form a self-healing ring; multiple independent rings supported

Supports BYPASS power-loss bypass to improve network reliability

Supports Dying Gasp on power loss and actively reports power-loss status via SNMP

Supports MODBUS/UDP/SNMP remote monitoring and mainstream OPC software

Built-in MicOS real-time OS shared across all MRD™ switches

Provides static and dynamic CPU resource allocation/limiting, and real-time monitoring of key parameters including CPU usage, RAM, supply voltage and motherboard voltage

Power-loss alarm relay

Fanless cooling; operating ambient temperature -40°C to +85°C

Low power consumption; EMC up to Level 4

Protection rating up to IP54/IP67

MTBF up to 600,000 hours

TCC4100 outdoor IP54/IP67 switch

Specifications

IEEE 802.3 CSMA/CD method and physical Layer

CSMA/CD method and physical layer specifications

IEEE 802.1p Priority Queuing

IEEE 802.1q VLAN Tagging

IEEE 802.1d Spanning Tree Algorithm

IEEE 802.1w Rapid Spanning Tree

IEEE 802.1s Multiple Spanning Tree

IEEE 802.3ac VLAN Tagging

IEEE 802.1x Authentication

IEEE 802.3ad Link Aggregation

IEEE 802.3x Flow Control

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3z Gigabit Ethernet

RFC 768 UDP

RFC 791 IP

RFC 792 ICMP

RFC 793 TCP

RFC 826 ARP

RFC 854 Telnet Client & Server

RFC 904 Exterior Gateway Protocol Formal Specification

RFC 1027 Using ARP to Implement Transparent Subnet Gateways (Proxy ARP)

RFC 1058 RIP

RFC 1059, 1119 NTPv1/2

RFC 1112 IGMP

RFC 1191 Path MTU Discovery

RFC 1256 ICMP Router Discovery Protocol

RFC 1267 A Border Gateway Protocol 3 (BGP-3)

RFC 1388 RIP Version 2 Carrying Additional Information

RFC 1519 CIDR (Classless Inter-Domain Routing)

RFC 1587 OSPF NSSA

RFC 1812 Requirements for IP Version 4 Routers

RFC 1994 PPP Challenge Handshake Authentica- tion Protocol (CHAP)

RFC 2068 HTTP

RFC 213 DHCP Server

RFC 2138 RADIUS

RFC 2139 RADIUS Accounting

RFC 2236 IGMPv2

RFC 2328 OSPF V2

RFC 2338 VRRP

RFC 2474 DiffServ Precedence

RFC 2475 DiffServ Core and Edge Router Func- tions

RFC 2597 DiffServ Assured Forwarding

RFC 2598 DiffServ Expedited Forwarding

RFC 2644 Directed Broadcasts

RFC 3046 DHCP Relay Agent Information Option

RFC 3222 Forwarding Information Base (FIB)

GMRP (GARP Multicast Registration Protocol)

GVRP (GARP VLAN Registration Protocol)

SSH2 Secure Shell 2

IGMP Snooping

SNMPv3

TCC4100 outdoor IP54/IP67 switch

  • Hardware Performance -

    Backplane bandwidth52Gbps
    processor333MHz RISC
    Switching TechnologyASIC-based store-and-forward
    MAC address table8K
    packet buffer4Mbit
    switching rate148,800 pps per Fast Ethernet port; 1,488,000 pps per Gigabit port

  • Software Features +

    Management MethodsBrowser, serial, STD-17 MIB-II, STD-58 SMIv2, STD-59 RMON, STD-62 SNMPv3, SNMPv2c, SNMPv1, RFC2925 Ping MIB, MRD Private MIBs
    DiagnosticsIndicators, log files, relay, RMON, port mirroring, TRAP
    RedundancyMRD-Ring®, xSTP, port aggregation
    other4K VLANs, IPv4/IPv6 multicast, storm control, MC/BC protection, Jumbo Frame support

  • Physical Performance +

    Mean Time Between Failures (MTBF)Over 600,000 hours
    Storage Temperature-40℃ ~ 85℃
    Operating temperature-40℃ ~ 85℃
    humidity5% ~ 95%, non-condensing
    Product dimensions (W× H × D)305mm × 175mm × 78.5mm (with SFP slots)
    305mm×167.5mm×78.5mm (without SFP slots)
    Protection ratingIP54/IP67
    Weight2.6 kg
    Power consumption15W (max., excluding PoE)
    TCC4100 outdoor IP54/IP67 switch

  • Mechanical Characteristics +

    vibrationIEC 60068-2-6
    impactIEC 60068-2-27
    free fallIEC 60068-2-31
    circuit boardCompliant with IPC standards

  • Electromagnetic Characteristics +

    EMI radiationFCC 47 CFR Part 15 Class A
    EN55032 Class A
    EN55035 Class A
    EMCIEC(EN)61000-4-2, Level 4
    IEC(EN)61000-4-3, Level 4
    IEC(EN)61000-4-4, Level 4
    IEC(EN)61000-4-5, Level 4
    IEC(EN)61000-4-6, Level 4
    IEC(EN)61000-4-9, Level 4

  • Industry Certification & Testing +

    Product SafetyCE
    IEC/EN60950-1
    FCC Part 15 Subpart B Class A
    hazardous areaUL121201 (pending)
    transportation industryJT/T817-2011
    rail industryEN50155； IEC/EN61373； EN50121； EN45545
    power industryIEC61850-3
    IEEE1613（C37.90.x）
    industrial control industryUL/cUL61010
    shipbuilding industryDNV-GL (pending)
    TCC4100 outdoor IP54/IP67 switch

Dimensions

DimensionsDimensions

Accessories

modelProduct Specification
TCC4100-CH004CILayer-3 switch with 12 Fast Ethernet + 4 Gigabit M12 copper ports, industrial isolated power supply (100-240V). 1 CLI port, 1 alarm relay port (250VAC, 2A@250VAC or 125VDC, 2A@30VDC). Protection rating up to IP54/IP67.
TCC4100-CW404CILayer-3: 12 Fast Ethernet + 4 Gigabit M12 copper + 4 combo Gigabit/Fast SFP slots; redundant dual DC isolated power (18–60VDC). 1 CLI port, 1 alarm relay (250VAC, 2A@250VAC or 125VDC, 2A@30VDC). Protection rating up to IP54/IP67.
TCC4100-CH404CILayer-3: 12 Fast Ethernet + 4 Gigabit M12 copper + 4 combo Gigabit/Fast SFP slots; industrial isolated power (100-240V). 1 CLI port, 1 alarm relay (250VAC, 2A@250VAC or 125VDC, 2A@30VDC). Protection rating up to IP54/IP67.
TCC4100-CF0044IPLayer-3: 12 Fast Ethernet (8 with PoE+) + 4 Gigabit M12 copper; redundant dual DC isolated power (44–57VDC). 1 CLI port, 1 alarm relay (250VAC, 2A@250VAC or 125VDC, 2A@30VDC). Protection rating up to IP54/IP67.
TCC4100-CH00C0XIBPLayer-3 switch with 12 Gigabit M12 copper ports (4 with BYPASS), industrial isolated power supply (100-240V). 1 CLI port, protection rating up to IP54/IP67.

Hotline: 86-21-58330762

Zip: 201203

Email: sales@mrdcom.net

Address: No.123 Curie Road, China (Shanghai) Pilot Free Trade Zone

Copyright 2026 MRD Co LTD . All Rights Reserved Shanghai ICP No.12035199

Top

Get a Quote

Leave your details and we will provide a quotation for this product.

Download

Leave your details. After successful submission, you can download the materials.